DEADBOLT Bowley Lock ROTASERA Grade 2 Double Deadbolt
Prices are in $USD
Double Deadbolts are Illegal to use in some jurisdictions on egress doors. By purchasing this lock you agree to following the laws that apply to your jurisdiction and Bowley Lock Company Inc. shall not be held liable for any misuse of this product resulting in any harm that may be caused by the misuse of this lock.
The Bowley Lock ROTASERA Grade 2 Double Deadbolt Package comes with 2 keys and upgraded heavy duty components and is suitable for those customers who want extra protection against destructive attacks. The deadbolt is a higher grade bolt with an integrated striker plate. The exterior cylinder housing is cast out of solid metal and come with large shields to protect against "ice pick attacks". The exterior housing is independently retained by 2 extra heavy duty screws which mount to an interior reinforcement plate to prevent the against "hammer attacks".
The internal lock cylinder does not use the Rotasera cylinder, it is supplied with a Pamex 6 pin tumbler lock. Double Deadbolts are illegal in some jurisdictions on egress doors because the added risk of getting out of a building in an emergency such as a fire is too high. Our Rotasera core, on top of needing the key in an emergency also requires some special knowledge on how to use it and as such is not suitable for the interior locking cylinder. In general these locks are used to stop criminals from reaching in through a broken window and operating the thumb turn. The Pamex 6 pin core provides that function while maintaining normal operating procedures and easy key replacement at any local hardware store. If multiple locks are ordered keyed alike the internal cylinders will be keyed alike but using the pamex key. Also 2 pamex keys will be provided per lock but up to a maximum of 4 keys. These keys however are readily cut anywhere keys are cut.
This Hardware may require some modifications to your current door!!!
***This lock requires a hole that is 2-1/8" through the door.
***This Lock requires a relief to be chiseled off the side of the door to make room for the integrated striker plate.
***This Lock may require some rework on the Door frame to take advantage of the frame striker assembly.
***This lock works best on doors thicker than 1-1/2". Door that are thinner than 1.5" may require a spacer ring.
This lock requires a 1" bolt hole (Standard in North America)
This lock is adjustable for 2-3/8" or 2-3/4" backsets (Standard in North America)
The modifications are not difficult for most DIY types. However tools such as a hole saw, chisel, and power drill will be required. If you do not feel confident in these activities the original deadbolt in the grade 3 hardware may be a better choice for you. A local locksmith can always assist in the installation as well.